All EPT shaft collars, including quick-clamping collars, are solitary point faced to make sure perpendicularity and proper alignment. This critical manufacturing step assures exact shaft collar face to bore relationship leading to correct aspect positioning on the shaft and also pressure on interfaced ingredients.
Quick-clamping shaft collars from EPT are made of high quality aluminium with type-II sulfuric anodized finishes, with a dark-colored finish upon the collar and a gold finish on the clamping lever for added visibility. Aluminium collars are corrosion tolerant, lighter than different metals, have low inertia and have non-magnetic properties. All EPT goods will be RoHS and REACH compliant. Available standard sizes for the quick-clamping shaft collars are 0.375” to at least one 1.5” in the inch series and 8 mm to 38 mm in the metric series.
This EPT two-piece clamping shaft collar is made of black oxide steel. It is a two-piece clamping shaft collar for applications needing a stronger holding power and higher axial load capacity than setscrew or one-piece clamping collars. The two-piece style separates into two halves, allowing unit installation or repositioning everywhere on the shaft cast aluminium china without disturbing existing elements. It accommodates a larger selection of shaft diameters than setscrew collars and works well on both hard and soft shafts. It is made of metal for weldability and rust resistance with a dark-colored oxide end for a decorative appearance and level of resistance to white-colored corrosion, chipping and flaking, and stick-slip of the screw during torqueing, bettering the collar’s grasp on the shaft. Black oxide also provides mild corrosion resistance and much better lubricity. This collar comes with forged socket-mind cap screws for securing the collar onto the shaft. The working temperatures for this collar range from -40 to 176 degrees C (-40 to 350 degrees F). This shaft collar is suited to use in various applications, which includes in the automotive industry to situate elements in automobile vitality steering assemblies, the production industry to locate pieces on a conveyor belt system, and the hobby craft sector to hold wheels on axles in handy remote control vehicles, among others.
Allows assembly / disassembly on and off the shaft without the need to remove other ancillary elements. Clamps firmly in place when tightened to the shaft. Perfect for positioning parts such as bearings or sprockets onto shafts.
The position is easily adjusted when fitted onto a shaft. Clamps firmly set up when tightened to the shaft. Perfect for positioning elements such as bearings or sprockets onto shafts.
The double split shaft collar made of steel browned (clamp collar) is simple to install. The shaft collars usually do not damage the shaft. They are also insensitive to external forces and vibrations and distribute the holding forces evenly over the entire shaft circumference.
Clamp-style and establish screw shaft collars from Grainger can be indispensable to power transmission. They can keep bearings and sprockets on shafts, situate pieces in electric motor and gearbox assemblies and serve as mechanical stops. A two-piece clamping shaft collar can easily wrap around a difficult or gentle shaft without marring. Set screw collars work with a cup stage socket arranged screw to lock onto a delicate or predrilled shaft.
The collar clamping mechanism works fast and efficiently with simple palm opening of the integral clamping lever, positioning the collar on the shaft, and closing the lever flush with the outer surface area of the collar. The design of the cam on the lever and the mating machined area on the collar assure a tight fit with a optimum axial load of 35 to 120 lbs / 133 to 489 N based on the collar bore size. In scenarios where higher holding ability is certainly or clamp axial load is necessary, the quick-clamping collar is not the recommended decision. EPT offers a comprehensive type of industry-leading one-part and two-piece shaft collars created for these applications.