The EP Greenhouse gearbox is a concise and lightweight reduction geared motor with a built-in limit switch system that is suitable for assembly of a locally available electric engine. The gear motor is utilized in manually-controlled or climate-managed ventilation and screen systems in greenhouses. The quick and easy-to-install EP reducer is usually rainproof and windproof. The gear driver has a high protection class (IP65) and can be used in an ambient temperature of 0-60 °C.
The low-noise reducer for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel tranny ensures that the drive shaft is usually locked when the decrease gearbox is not running. The completely sealed reduction reducer has an expansion chamber with a diaphragm to keep the gear 
essential oil at a low pressure under all situations, even at high temperatures. Thanks to the utilization of an growth chamber, the gear motor can be installed in any position. There are no limitations, because there is no need for a bleed plug. The sealed reduction gear reducer keeps the apparatus essential oil of the gearbox in optimum condition because of its entire operating life time. The geared motor is suitable for discontinuous use, operating course s3-30%, with a maximum activation period of 25 minutes.
The Gear box reduction geared motor has an FT85 motor assembly flange, on to which the right IEC standard motor can easily be installed (EN 50347).
The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit switch system is installed in an included chamber and is definitely enclosed by an impact-resistant plastic-type cover. The limit change system is obtainable and simple to adjust. The limit switch system’s maximum switching range is definitely 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The gear motor has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The gear reducer for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.
Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of software of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperature ranges of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, optimum activation time 25 a few minutes.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC regular motor (EN 50347).
Maximum switching range of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).