Single and double Plastic Gear Rack reduction planetary gear drives to be utilized with electric, hydraulic, air flow motors or mechanical power insight from high rate, low torque sources to provide decreased speeds at increased torques. The input side has regular SAE pads for motor mounting. Obtainable in the three result configurations shown below. Many units can be furnished with an intrinsic parking brake.
Single reduction drives are limited by 3500 RPM input; double reduction drives to 5000 RPM. Units with essential parking input rate is bound to 2500 RPM.The same torque is available in either direction of rotation. Torque rankings are intermittent. For continuous operation reduce torque ratings to about 1/3 to 1/2 the values shown. Models provide 95% power transmission efficiency.

Wheel Drive
Input side has standard SAE pads and splined input. Output part has hub for mounting vehicle wheel. Free wheel can be done by using the springtime disconnect to disengage the drive shaft. The disengage feature can be standard on all wheel drives.

Shaft Output
Input side standard SAE pads with splined input. Output side options include: Keyed round, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is standard SAE pads with splined input. Output side has a flanged spindle for coupling to the load.

Swing Drives
Ever-Power model 6 is offered with or without integral parking brakes. The “SW” Power Wheel provides extra-large tapered roller bearings, a ductile iron hub and warmth treated ring gear to minimize backlash growth due to wear. The exterior bearing nut supplies the supreme in shaft retention and shaft strength. Output could be a spindle shaft or numerous sizes of essential pinion gears.