We – EPG Group the bigge EPT Chain and agricultural gearbox factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Welcome to EPT RO EPT FORMING MACHINE,we are your professional roll forming machine expert
What is important is that ,customized machines are available
They are widely used as the roof of garden like factory, hotel, exhibition center, villa, civil construction, etc.
It is passive type could load coil by expend the blots fix at coil inner diameter. It’s easy to operate and economical solution.
Xihu (We EPT Lake) Dis. device
Adopt guiding bar and sliding block to control the width and position of the steel sheet. The coil is guided in the correct position and passed to the roll forming system. Can adju EPT the guiding bar with loosing the fixing bolts to feed sheet in right position. It’s fixed structure to make sure can not move easily.
Roll Forming System:
Roll forming system consi EPT of machine frame, transmission system, electrical motor and roll forming system.
A. Machine frame adopts welding structure with shot blasting and painting treatment
B. All rollers material adopt high quality No. 45 steel, with hard chrome coated on surface, all treatment by full CNC machines, to make sure the rollers with good rigidity and precision, and form perfect roofing sheet as per design.
C. All rolling shafts are made by high quality No. 45 steel with quench and temper treatment, so the shafts with good rigidity which could use for long tern without deformation.
D. Rolling shafting supporting structure type is steel wall and welded with the basement together to have rigidity.
E. Cycloidal pin gear speed reducer motor driven, the back/forward roller driven by chain, part of upper/lower rollers driven by gear
F. Adju EPT the screw bar manually to adju EPT the distance between upper/lower rollers for difference thickness of sheet.
(Attention: all rolling system has adjusted in our company as a perfect situation, we don’t sugge EPT to adju EPT the rollers at random, if necessary, should adju EPT by a experienced technician or after train by our engineer. Otherwise will cause the machine can not form a good profile
A. Adopts po EPT cutting, the cutting blade material is Cr12 with quenched treatment, after cutting, there is no material wasted.
B. Adopts welded frame for good rigidity.
C. The cutting action is droved by the power from hydraulic station which guarantees the procession of the cutting and low noisy, long life.
It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank, the pumps drive the cutter machine to begin the cutting job.
The system includes a set of hydraulic tank, a set of hydraulic oil pump, two hydraulic pipes. And two sets of electromagnetism valves.
Power of the oil pump: 3kw
EPT oil: 40#
PLC control system
It adopts industrial computer to control. The target piece’s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.
Processing precision: within 1.00mm
It contains liquid crystal screen, programmer, transformer for the electronic machines and kits of every part. Touch screen
PLC is ZheJiang Panasonic
Transducer brand is ZheJiang Delta
The seller should provide Chinese and English language screen
One counter gauges length, pulses, and decides length.
|main parameter of roll forming machine|
|Suitable to process||Steel plate|
|Width of the plate||1000mm/1200mm/1250mm|
|Thickness of the plate||0.2-0.8mm|
|Diameter of the roller||¢70mm|
|Voltage||380V 50Hz 3phases|
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.