Additional Features:
Made of Steel
For use with cast iron bushed bore pulley
This U1 Bushing with 5-1/2″ bore is a high-quality precision product that is built for sturdiness and strength. U1 bushings are being used in an extensively wide selection of applications, including; sprockets, shaves, pulleys, gears, and much more, we also offer most of these items. What pieces this bushing apart is the high-quality steel engineering along with specific manufacturing and high quality control; this means that you always get a premium quality regular product. What really pieces us in addition to the other folks is our experienced expert workers and our company-wide objective of customer satisfaction.
1. Be certain the tapered cone surfaces of the bushing and the within of the driven item happen to be clean and free from anti-seize lubricants.
2. Place the bushing in sprocket or different portion type that accepts the bushing.
3. Place cap screws loosely in pull-up holes. The bushing remains loose to make sure sliding match on shaft.
4. With key on shaft, slide the sprocket or other portion type to the required position on the shaft. Make sure you keep the heads of the cap screws accessible.
5. Align the sprocket or part type, tighten the screws additionally and progressively until they happen to be pulled up tight. Usually do not make use of extensions on the wrench handles , nor allow the sprocket or component to always be drawn i contact with flange of bushing. At this stage there must be a gap between your bushing flange and sprocket, make sure this gap will not close.
Twice split barrel ensures concentricity
Grips the shaft with confident clamp fit
High torque carrying capacity
Permits blind assembly
Load not carried or limited by mounting screws
External key on most sizes for great drive and increased torque carrying capabilities
Double-split barrel for great clamping
Solid flange to keep up concentric bores
Available in in ., metric, and spline bores. Bore range between 3/8″ to 10″
Solid Flange & Twice Split Barrel – Assures better concentricity to the shaft.
Key to Key Travel – With keys upon both the shaft and item to supply the strongest possible travel.
3/4″ per Foot Taper on Barrel – Self locking taper supplies the highest amount of mechanical locking product to product.
Taper bushing are widely used together with sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore 
Split Taper Bushing china connections.
Taper bushing series are made from high quality engineered elements with wonderful tolerance. The feature is easy to use and needs no extra alteration. These bushings can fit almost all types of assemblies and sizes. They will be the best choice in design for mechanical connections.
To complete designations put bore size. For instance: PD1215X16MM designates a 1215 taper bushing with a 16mm bore.
No costly re-boring: complete selection of both metric and imperial obtainable.
Standard range meets up to 125mm/5″ shafts & Hub diameter required is determined by the application.
Complete brief reach range readily available, for compact compact assemblies & Clean, Compact Style.
Ease of installation and removal.
This Split Taper Bushing was created exclusively for use with cast iron bushed bore pulleys and can be purchased on a single page as the pulley you need.
For use with 1 3/16” shaft sizes.
Includes 2 set screws.